Chevrolet 2009 Cobalt Owner'S Manual Download Page 308

Page: 308 / 436

Taillamps, Turn Signal, Stoplamps
and Back-up Lamps (Sedan)

To replace one of these bulbs:

1. Open the trunk.

2. Remove the trunk trim and pull back fastener.

3. Remove the additional fastener.

4. Remove the outer two screws from the taillamp

assembly.

5. Lift up on the tab and pull the wiring harness

straight out.

6. Remove the taillamp assembly from the quarter

panel.

A. Sidemarker

B. Stoplamp/Turn Signal/Taillamp

C. Back-up

7. Turn the bulb socket counterclockwise and pull it

straight out.

8. Pull the old bulb straight out of the socket.

9. Push the new bulb straight into the socket.

10. Push the new bulb into the taillamp assembly and

turn it clockwise to lock it into place.

11. Reinstall the taillamp assembly into the quarter

panel.

5-50

Summary of Contents for 2009 Cobalt





















































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Cobalt

Reviews:

Brands by name

Popular brands

Chevrolet 2009 Cobalt, Owner'S Manual

Search results

Summary of Contents for 2009 Cobalt

Reviews:

Brands by name

Popular brands