Chevrolet 2009 Cobalt Owner'S Manual Download Page 301

Page: 301 / 436

A. Heavy, Unpainted Metal Engine Part or Remote

Negative (

−

) Terminal (GND)

B. Good Battery or Remote Positive (+) and Remote

Negative (

−

) Terminals

C. Dead Battery or Remote Positive (+) Terminal

To disconnect the jumper cables from both vehicles:

1. Disconnect the black negative (

−

) cable from

the vehicle that had the dead battery.

2. Disconnect the black negative (

−

) cable from the

vehicle with the good battery.

3. Disconnect the red positive (+) cable from the

vehicle with the good battery.

4. Disconnect the red positive (+) cable from the other

vehicle.

5. Return the positive (+) terminal cover to its original

position.

Jumper Cable Removal

5-43

Summary of Contents for 2009 Cobalt





















































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Cobalt

Reviews:

Brands by name

Popular brands

Chevrolet 2009 Cobalt, Owner'S Manual

Search results

Summary of Contents for 2009 Cobalt

Reviews:

Brands by name

Popular brands