Chevrolet 2007 Monte Carlo Owner'S Manual Download | Manualshive

Page: 360 / 456

background image

When the malfunction indicator is illuminated, the
system may not be able to detect or signal low
tire pressure as intended. TPMS malfunctions may
occur for a variety of reasons, including the
installation of replacement or alternate tires or
wheels on the vehicle that prevent the TPMS from
functioning properly. Always check the TPMS
malfunction telltale after replacing one or more
tires or wheels on your vehicle to ensure that the
replacement or alternate tires and wheels allow
the TPMS to continue to function properly.

A Tire and Loading Information label, attached to
your vehicle, shows the size of your vehicle’s
original equipment tires and the correct inflation
pressure for your vehicle’s tires when they
are cold. See

Loading Your Vehicle on page 277

,

for an example of the Tire and Loading
Information label and its location on your vehicle.
Also see

Inflation - Tire Pressure on page 357

.

Your vehicle’s TPMS system can warn you about a
low tire pressure condition but it does not replace
normal tire maintenance. See

Tire Inspection and

Rotation on page 362

and

Tires on page 349

.

Notice:

Do not use a tire sealant if your vehicle

has Tire Pressure Monitors. The liquid sealant
can damage the tire pressure monitor sensors.

The TPMS will not function properly if one or more
of the TPMS sensors are missing or inoperable.
If the system detects a missing or inoperable
sensor, an error message SERVICE TIRE
MONITOR SYSTEM will be shown on the DIC
display. If you have replaced a tire/wheel assembly
without transferring the TPMS sensors, the error
message will be displayed. Once you re-install the
TPMS sensors, the error message should go
off. See your GM dealer for service if all TPMS
sensors are installed and the error message
comes on and stays on.

TPMS Sensor Identification Codes

Each TPMS sensor has a unique identification
code. Any time you replace one or more of
the TPMS sensors or rotate the vehicle’s tires,
the identification codes will need to be matched
to the new tire/wheel position. The sensors
are matched, to the tire/wheel positions, in the
following order: driver’s side front tire, passenger’s
side front tire, passenger’s side rear tire, and
driver’s side rear tire using a TPMS diagnostic
tool. See your GM dealer for service.

360

«
...
358
359
360
361
362
...
»

Summary of Contents for 2007 Monte Carlo









































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Monte Carlo

BLACK STEEL S2560

Brand: Fab Fours Pages: 9

Brand: Cadillac Pages: 522

Brand: walser Pages: 24

Brand: BURY Pages: 2

Brand: Whelen Engineering Company Pages: 9

Brand: Honda Pages: 124

Quantum Wash'n'Wipe N30208

Brand: National Cycle Pages: 12

Brand: ECS Pages: 4

Brand: Whispbar Pages: 15

Brand: Blue Ox Pages: 5

Brand: Painless Performance Pages: 16

Brand: EUFAB Pages: 8

Brand: BabySafe Pages: 43

Brand: E-Lead Pages: 11

Auto Security AA-9103N

Brand: Audiovox Pages: 1

Brand: AUTOTECH Pages: 2

Brand: MovaNext Pages: 4

Brand: Valeo Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands