Chevrolet 2007 Monte Carlo, Owner'S Manual

Page: 363 / 456

When rotating your tires, always use the correct
rotation pattern shown here.
Do not include the compact spare tire in your
tire rotation.
After the tires have been rotated, adjust the
front and rear inflation pressures as shown
on the Tire and Loading Information label.
See
Inflation - Tire Pressure on page 357
and Loading Your Vehicle on page 277 .
Reset the Tire Pressure Monitor System. See
“TPMS Sensor Identification Codes” under
Tire Pressure Monitor System on page 358 .
Make certain that all wheel nuts are properly
tightened. See “Wheel Nut Torque” under
Capacities and Specifications on page 400 .
{
CAUTION:
Rust or dirt on a wheel, or on the parts to
which it is fastened, can make wheel nuts
become loose after time. The wheel could
come off and cause an accident. When
you change a wheel, remove any rust or
dirt from places where the wheel attaches
to the vehicle. In an emergency, you can
use a cloth or a paper towel to do this;
but be sure to use a scraper or wire brush
later, if needed, to get all the rust or dirt
off. See
Changing a Flat Tire on page 372 .
363