Chevrolet 2007 Monte Carlo Owner'S Manual Download Page 307

Page: 307 / 456

Hood Release

To open the hood, do the following:

1. Pull the interior

hood release handle
with this symbol
on it. It is located
to the left of
the parking brake
pedal.

2. Then go to the front of the vehicle and

release the secondary hood latch, located
near the center of the hood front, by pushing
the latch to the right.

3. Lift the hood.

Before closing the hood, be sure all the filler caps
are on properly. Then pull the hood down and
close it firmly.

307

Summary of Contents for 2007 Monte Carlo









































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Monte Carlo

Reviews:

Brands by name

Popular brands

Chevrolet 2007 Monte Carlo, Owner'S Manual

Search results

Summary of Contents for 2007 Monte Carlo

Reviews:

Brands by name

Popular brands