manualshive.com logo in svg

Chevrolet 2007 Monte Carlo, Owner'S Manual

Share
Download
Chevrolet 2007 Monte Carlo Owner'S Manual Download Page 11

The seats have manual reclining seatbacks.
The lever used to operate them is located on
the outboard side of the seats.

To recline the seatback, do the following:

1. Lift the recline lever.
2. Move the seatback to the desired position,

then release the lever to lock the seatback
in place.

3. Push and pull on the seatback to make sure

it is locked.

To return the seatback to an upright position, do
the following:

1. Lift the lever fully without applying pressure

to the seatback and the seatback will return
to the upright position.

2. Push and pull on the seatback to make sure

it is locked.

Driver’s Seat with Manual Lumbar,

Power Seat Control, and Manual Recline shown

11

Summary of Contents for 2007 Monte Carlo









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands