Home
/
Chevrolet
/
2006 Equinox
/
Owner'S Manual

Chevrolet 2006 Equinox, Owner'S Manual, Page: 158 / 390

Share

Page: 158 / 390

Chevrolet 2006 Equinox Owner'S Manual Download Page 158

Fuel Information

r

(Fuel Information): Press this button to scroll

through the range, average fuel economy, instant fuel
economy, and engine oil life.

Fuel Range

Press the fuel information button until RANGE appears to
display the remaining distance you can drive without
refueling. It is based on fuel economy and the fuel
remaining in the tank. The display will show FUEL LEVEL
LOW and a chime will sound if the fuel level is low. The
check gages warning light on the instrument panel cluster
will also be illuminated. See Check Gages Warning Light
on page 3-38 for more information.

The fuel economy data used to determine fuel range is
an average of recent driving conditions. As your
driving conditions change, this data is gradually updated.
Fuel range cannot be reset.

Average Fuel Economy

Press the fuel information button until AVG. ECON
appears in the display. Average fuel economy is how
many miles per gallon (MPG), kilometers per liter (km/L),
or liters per 100 kilometers (L/100 km) your vehicle is
getting based on current and past driving conditions.

Press and hold the select button while AVG. ECON is
displayed to reset the average fuel economy. Average
fuel economy will then be calculated starting from
that point. If the average fuel economy is not reset, it
will be continually updated each time you drive.

Instant Fuel Economy

Press the fuel information button until INST. ECON
appears in the display. Instant fuel economy is
how many miles per gallon (MPG), kilometers per
liter (km/L), or liters per 100 kilometers (L/100 km) your
vehicle is at the particular moment in time. The
instant fuel economy cannot be reset.

3-44

«
...
156
157
158
159
160
...
»

Summary of Contents for 2006 Equinox







































































































































































































































































































































































































Reviews:

No comments