Home
/
Chevrolet
/
2006 Equinox
/
Owner'S Manual

Chevrolet 2006 Equinox, Owner'S Manual, Page: 125 / 390

Share

Page: 125 / 390

Chevrolet 2006 Equinox Owner'S Manual Download Page 125

S

(Resume/Accelerate): Move the switch to this

position to resume a set speed or to accelerate.

T

(Set): Press this button, located at the end of the

lever, to set a speed.

9

(Off): This position turns the cruise control system

off and cancels memory of a set speed.

1. Move the cruise control switch to on.

2. Get up to the speed you want.

3. Press in the set button at the end of the lever and

release it.

4. Take your foot off the accelerator pedal. The

accelerator pedal will not go down.

The cruise light on the
instrument panel cluster
will illuminate when
the cruise control
is engaged.

Resuming a Set Speed

Suppose you set your cruise control at a desired speed
and then apply your brakes or the clutch, if equipped.
This, of course, shuts off the cruise control. But you do
not need to reset it.

Once you are going about 25 mph (40 km/h) or more,
you can move the cruise control switch briefly from on to
resume/accelerate.

You will go right back up to your chosen speed and
stay there.

If you hold the switch at resume/accelerate, the vehicle
will keep going faster until you release the switch or
apply the brake. So unless you want to go faster, do not
hold the switch at resume/accelerate.

3-11

«
...
123
124
125
126
127
...
»

Summary of Contents for 2006 Equinox







































































































































































































































































































































































































Reviews:

No comments