Home
/
Chevrolet
/
2006 Equinox
/
Owner'S Manual

Chevrolet 2006 Equinox, Owner'S Manual, Page: 113 / 390

Share

Page: 113 / 390

Chevrolet 2006 Equinox Owner'S Manual Download Page 113

15. Push down on the roof tonneau to close and

latch it.

16. Using the release tool for the convertible top, hook

the tool into the red loop, and pull, latching the
tonneau cover.

17. Once the roof tonneau is closed and latched, adjust

the cables located behind the seats. Pull the cable
with the red band until both cables are the same
length. Repeat this step on the other side.

18. Check the roof tonneau to make sure it is secure

before driving.

Vehicle Personalization

In addition to the following features, your vehicle may
also have features that can be programmed through the
Driver Information Center (DIC). See DIC Vehicle
Personalization on page 3-52 for more information.

Memory Seat

Your vehicle may have a memory driver’s seat. The
controls for this feature are located on the outboard side
of the driver’s seat and are used to program and
recall memory settings for the driver’s seating positions.

Boot cover panel down, roof tonneau up

2-53

«
...
111
112
113
114
115
...
»

Summary of Contents for 2006 Equinox







































































































































































































































































































































































































Reviews:

No comments