Chevrolet 2006 Colorado Owner'S Manual Download Page 353

Page: 353 / 430

If the flat tire is on the front of the vehicle, position
the jack to the rear of the front tire in the pocket
off of the frame.

If the flat tire is on the rear, position the jack under
the rear axle and get as close as possible to the
shock absorber.

4. Make sure the jack head is positioned so that the

rear axle is resting securely between the grooves
that are on the jack head.

5. Turn the wheel wrench clockwise to raise the

vehicle. Raise the vehicle far enough off the ground
so there is enough room for the spare tire to fit
under the wheel well.

Front Position

Rear Position

5-77

Summary of Contents for 2006 Colorado















































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Colorado

Reviews:

Brands by name

Popular brands

Chevrolet 2006 Colorado, Owner'S Manual

Search results

Summary of Contents for 2006 Colorado

Reviews:

Brands by name

Popular brands