Chevrolet 2006 Colorado Owner'S Manual Download Page 323

Page: 323 / 430

Headlamps

Composite Headlamp System

A. Low-Beam Headlamp/DRL

B. High-Beam Headlamp

To replace the headlamp bulbs, do the following:

1. Open the hood. See Hood Release on page 5-11

for more information.

2. Reach in and access the bulb sockets from inside

the engine compartment.

3. Turn the bulb socket counterclockwise and pull it

straight out of the headlamp assembly.

4. Unplug the electrical connector from the old bulb by

releasing the clips on the bulb socket.

5. Plug in the electrical connector to the new bulb.

6. Place the connector with the new bulb into the

headlamp assembly and turn it clockwise until it
is tight.

5-47

Summary of Contents for 2006 Colorado















































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Colorado

Reviews:

Brands by name

Popular brands

Chevrolet 2006 Colorado, Owner'S Manual

Search results

Summary of Contents for 2006 Colorado

Reviews:

Brands by name

Popular brands