Chevrolet 2006 Colorado Owner'S Manual Download Page 144

Page: 144 / 430

Exterior Lamps

The control on the driver’s side of your instrument panel
operates the exterior lamps.

(Exterior Lamps): Turn the knob, located to the

right of this symbol, to choose one of the four exterior
lamp positions.

(Off): Turn the knob to this position to turn off all

exterior lamps including the DRLs.

AUTO: Turn the knob to this position to automatically
turn on the headlamps at normal brightness, together
with the following:

•

Sidemarker Lamps

•

Taillamps

•

Parking Lamps

•

Instrument Panel Lights

See Automatic Headlamp System on page 3-15 for
more information.

;

(Parking Lamps): Turn the knob to this position to

turn on the parking lamps, together with the following:

•

Sidemarker Lamps

•

Taillamps

•

License Plate Lamps

•

Instrument Panel Lights

(Headlamps): Turn the knob to this position to turn

on the headlamps, together with the previously listed
lamps and lights.

You can switch your headlamps from low to high beam
by pushing the turn signal/multifunction lever toward
the instrument panel.

3-14

Summary of Contents for 2006 Colorado















































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Colorado

Reviews:

Related manuals for 2006 Colorado

Brands by name

Popular brands

Chevrolet 2006 Colorado, Owner'S Manual

Search results

Summary of Contents for 2006 Colorado

Reviews:

Related manuals for 2006 Colorado

Brands by name

Popular brands