Chevrolet 2006 Colorado Owner'S Manual Download Page 114 | Manualshive

Page: 114 / 430

background image

Shifting Out of NEUTRAL

After towing your vehicle, you will have to shift out of
NEUTRAL in order to drive. To shift out of NEUTRAL,
do the following:

1. Set the parking brake and apply the regular

brake pedal.

2. Start a vehicle with an automatic transmission in

PARK (P). Use FIRST (1) for vehicles with a
manual transmission.

3. Shift the transmission to NEUTRAL (N), or press

the clutch pedal for vehicles with a manual
transmission.

4. Press the button for the desired transfer case shift

position (Two-Wheel High, Four-Wheel High, or
Four-Wheel Low).

5. After the transfer case has shifted out of NEUTRAL,

the indicator light will go out.

6. Release the parking brake.

7. Shift the transmission to the desired position.

Parking Brake

The parking brake pedal is
located to the left of the
regular brake pedal,
near the driver’s door.

To set the parking brake, hold the regular brake
pedal down with your right foot. Push the parking
brake pedal down to its fully-applied position with
your left foot.

2-28

«
...
112
113
114
115
116
...
»

Summary of Contents for 2006 Colorado















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2006 Colorado

Brand: JAC Pages: 70

Brand: GMC Pages: 425

Brand: Ford Pages: 37

Brand: Edelbrock Pages: 1

Brand: FORM FIT Pages: 2

1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28

Brand: Havis-Shields Pages: 3

PRIME DESIGN VRR-E-PM21

Brand: Safe Fleet Pages: 12

Brand: Nav TV Pages: 5

Ram Commercial2016

Brand: Dodge Pages: 675

Brand: SAN HIMA Pages: 7

Peterbilt SmartAir

Brand: Paccar Pages: 58

Brand: Mercedes-Benz Pages: 153

Brand: ideus Pages: 159

2014 Grand Cherokee SRT8

Brand: Jeep Pages: 596

Brand: Skoda Pages: 4

Brand: ULTIMATE SPEED Pages: 32

Brand: Chevrolet Pages: 441

BEDXTENDER HD MAX 74841-00A

Brand: AMP Research Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands