Chevrolet 2004 Malibu Owner'S Manual Download

Page: 330 / 426

2. Unscrew the two

fasteners located
on the inside of the
trunk at the rear of
the vehicle.

3. Gently pull back the trunk trim.

4. Remove the plastic wing nut.

5. Pull out the taillamp assembly and turn the bulb

socket one quarter turn counterclockwise.

6. Gently wiggle the

bulb to remove it from
the socket. Replace
the bulb.

7. Reverse the steps to attach the taillamp assembly

to the vehicle.

8. When securing the lamp assembly back into place,

align the assembly so that the trunk lid doesn’t
contact it.

9. Close the trunk.

5-48

Summary of Contents for 2004 Malibu











































































































































































































































































































































































































































Search results

Summary of Contents for 2004 Malibu

Reviews:

Related manuals for 2004 Malibu

Brands by name

Popular brands

Chevrolet 2004 Malibu, Owner'S Manual

Search results

Summary of Contents for 2004 Malibu

Reviews:

Related manuals for 2004 Malibu

Brands by name

Popular brands