Chevrolet 2004 Malibu Owner'S Manual Download

Page: 328 / 426

1. Open the hood.

2. Carefully remove the two bolts attaching the

headlamp assembly to the vehicle.

3. Remove the lamp assembly from the vehicle by

pulling it forward. Use care not to scratch the
vehicle with the lamp or the lamp with the fender.

4. Remove the rubber covers from the individual

sockets.

5. Unclip the wiring

harness and twist
the socket less than
one-quarter turn
counterclockwise
and remove it.

5-46

Summary of Contents for 2004 Malibu











































































































































































































































































































































































































































Search results

Summary of Contents for 2004 Malibu

Reviews:

Related manuals for 2004 Malibu

Brands by name

Popular brands

Chevrolet 2004 Malibu, Owner'S Manual

Search results

Summary of Contents for 2004 Malibu

Reviews:

Related manuals for 2004 Malibu

Brands by name

Popular brands