manualshive.com logo in svg

Chevrolet 2000 Impala, Owner'S Manual, Page: 237 / 365

Share
Download
Chevrolet 2000 Impala Owner'S Manual Download Page 237

yellow

blue     

5-16

NOTICE:

In cold weather, water can freeze and crack the
engine, radiator, heater core and other parts. 
Use the recommended coolant and the proper
coolant mixture.

CAUTION:

You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol
and it will burn if the engine parts are hot
enough. Don’t spill coolant on a hot engine.

When the coolant in the coolant recovery tank is at the
COLD mark, start your vehicle.

If the overheat warning continues, there’s one more
thing you can try. You can add the proper coolant
mixture directly to the radiator, but be sure the cooling
system is cool before you do it.

Summary of Contents for 2000 Impala














































































































































































































































































































































































Reviews:

No comments