manualshive.com logo in svg

Chevrolet 2000 Impala, Owner'S Manual

Share
Download
Chevrolet 2000 Impala Owner'S Manual Download Page 229

yellow

blue     

5-8

8. Attach the cable at least 18 inches (45 cm) away

from the dead battery, but not near engine parts that
move. The electrical connection is just as good
there, but the chance of sparks getting back to the
battery is much less.

9. Now start the vehicle with the good battery and run

the engine for a while.

10. Try to start the vehicle with the dead battery. 

If it won’t start after a few tries, it probably 
needs service.

11. Remove the cables in reverse order to prevent

electrical shorting. Take care that they don’t touch
each other or any other metal.

A. Heavy Metal Engine Part

B. Good Battery

C. Dead Battery

Summary of Contents for 2000 Impala














































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands