manualshive.com logo in svg

Chevrolet 2000 Impala, Owner'S Manual

Share
Download
Chevrolet 2000 Impala Owner'S Manual Download Page 11

yellow

blue     

1-4

Heated Front Seat (If Equipped)

If your vehicle is equipped with this feature, both the
driver’s and passenger’s heated seat switches are on the
outboard side of the seat near the front.

Press LO to warm the seat to a lower temperature. Press
HI to warm the seat to a higher temperature. To turn this
feature off, place the switch in the center position.

Reclining Front Seatbacks

Lift the lever to release the seatback, then move the
seatback to where you want it. Release the lever to lock
the seatback in place. Pull up on the lever without pushing
on the seatback, and the seatback will move forward.

Summary of Contents for 2000 Impala














































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands