manualshive.com logo in svg

Chevrolet 2000 Impala, Owner'S Manual

Share
Download
Chevrolet 2000 Impala Owner'S Manual Download Page 150

yellow

blue     

3-7

Rear Window Defogger

The rear window
defogger uses a
warming grid to
remove fog from 
the rear window. 
Press the button
marked         REAR to
turn the defogger on.
An indicator on the
button will light.

The rear window defogger will turn itself off after about
15 minutes. If you turn it on again, the defogger will
only run for about 7.5 minutes before turning off. You
can also turn the defogger off by turning the ignition off
or by pressing the button again.

Do not attach anything like a temporary vehicle license
or decal across the defogger grid.

NOTICE:

Don’t use a razor blade or something else sharp
on the inside of the rear window. If you do, you
could cut or damage the warming grid, and the
repairs wouldn’t be covered by your warranty.
Don’t put decals there because you might have to
scrape them off.

Summary of Contents for 2000 Impala














































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands