manualshive.com logo in svg

Chevrolet 2000 Express Van, Owner'S Manual

Share
Download
Chevrolet 2000 Express Van Owner'S Manual Download Page 97

yellow

blue     

2-21

4. Before starting the engine, be sure to unplug 

and store the cord as it was before to keep it away
from moving engine parts. If you don’t, it could 
be damaged.

How long should you keep the coolant heater plugged
in? The answer depends on the outside temperature, the
kind of oil you have, and some other things. Instead of
trying to list everything here, we ask that you contact
your dealer in the area where you’ll be parking your
vehicle. The dealer can give you the best advice for that
particular area.

Automatic Transmission Operation

There are several different positions for your shift lever.

Your vehicle is equipped with an automatic
transmission, and it features an electronic shift position
indicator within the instrument cluster. This display
must be powered anytime the shift lever is capable of
being moved out of the PARK (P) position. This means
that if your key is in OFF, but not locked, there will be a
small current drain on your battery which could
discharge your battery over a period of time. If you have
a need to leave your key in the ignition in OFF for an
extended period for any reason, it is recommended that
you disconnect the battery cable from the battery to
prevent discharging your battery.

Summary of Contents for 2000 Express Van















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands