manualshive.com logo in svg

Chevrolet 2000 Express Van, Owner'S Manual

Share
Download
Chevrolet 2000 Express Van Owner'S Manual Download Page 119

yellow

blue     

2-43

Mirrors

Inside Day/Night Rearview Mirror

Pull the tab under the mirror toward you to reduce 
glare from headlamps behind you after dark. Push 
the tab away from you to restore the mirror to the
original position.

Outside Mirrors

Adjust your outside mirrors so you can just see the 
side of your vehicle, and have a clear view of objects
behind you. Some mirrors can be folded in to enter 
narrow doorways.

Electric Outside Rearview Mirrors (Option)

If you have electric mirrors, they can be adjusted from
inside the vehicle.

Select the mirror you want
to move by rotating the
switch clockwise to adjust
the passenger’s side mirror
and counterclockwise to
adjust the driver’s side
mirror. The center position
is neutral.

Then, adjust the mirror angle by pressing the outer
arrows on the switch until the mirror is adjusted where
you want it.

Summary of Contents for 2000 Express Van















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands