manualshive.com logo in svg

Chevrolet 2000 Express Van, Owner'S Manual

Share
Download
Chevrolet 2000 Express Van Owner'S Manual Download Page 353

Short Trip/City Scheduled Maintenance

yellow

blue     

7-29

j Replace fuel filter. 

An Emission Control Service. (See footnote 

[.) 

j Replace engine air cleaner filter. 

An Emission Control Service. 

j Rotate tires. See “Tire Inspection and Rotation” in the Index for proper

rotation pattern and additional information. (See fo.)

j Vehicles With GVWR Above 10,000 lbs. or Equipped with Diesel Engine

Only: Inspect shields for damage or looseness. Adjust or replace as required.
This is a Noise Emission Control Service. Applicable only to vehicles sold in
the United States.

j Diesel Engine Only: Check the air intake system installation to assure that

gaskets are properly sealed and that all hose connections, fasteners and other
components are tight. Also check to be sure that the air cleaner housing is
properly seated and the cover fits tightly. Tighten connections and fasteners or
replace damaged parts as necessary. This is a Noise Emission Control Service.
Applicable only to vehicles sold in the United States.

j Diesel Engine Only: If your engine has a thermostatically controlled cooling fan, 

inspect all hoses and ducts for proper hook

-

up (or every 12 months, whichever 

occurs first). Be sure the valve works properly. This is a Noise Emission Control 
Service. Applicable only to vehicles sold in the United States.

Summary of Contents for 2000 Express Van















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands