manualshive.com logo in svg

Chevrolet 2000 Express Van, Owner'S Manual

Share
Download
Chevrolet 2000 Express Van Owner'S Manual Download Page 89

yellow

blue     

2-13

To open the rear portion of a 60/40 door from the
outside, pull the handle on the side of the rear door and
pull it towards you.

To close the side doors, close the rear door first. Then
close the front door. Check to make sure both doors are
completely closed.

The front side swing

-

out door has a check strap

assembly in the door frame to keep the door from
opening beyond 90 degrees.

To open the door beyond 90 degrees, close the door
partially, pull the check strap outward at the spring hole
and then open the door. When you close the door, the
check strap will automatically re

-

engage.

Summary of Contents for 2000 Express Van















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands