manualshive.com logo in svg

Chevrolet 2000 Express Van, Owner'S Manual

Share
Download
Chevrolet 2000 Express Van Owner'S Manual Download Page 203

yellow

blue     

4-31

CAUTION:

Do not load your vehicle any heavier than the
GVWR, or either the maximum front or rear
GAWR. If you do, parts on your vehicle can
break, and it can change the way your vehicle
handles. These could cause you to lose control
and crash. Also, overloading can shorten the life
of your vehicle.

Using heavier suspension components to get added
durability might not change your weight ratings. Ask
your dealer to help you load your vehicle the right way.

NOTICE:

Your warranty does not cover parts or
components that fail because of overloading.

If you put things inside your vehicle 

--

 like suitcases,

tools, packages, or anything else 

--

 they will go as fast

as the vehicle goes. If you have to stop or turn quickly,
or if there is a crash, they’ll keep going.

CAUTION:

Things you put inside your vehicle can strike and
injure people in a sudden stop or turn, or in 
a crash.
D Put things in the cargo area of your vehicle.

Try to spread the weight evenly.

D Never stack heavier things, like suitcases,

inside the vehicle so that some of them are
above the tops of the seats.

D Don’t leave an unsecured child restraint in

your vehicle.

D When you carry something inside the

vehicle, secure it whenever you can.

D Don’t leave a seat folded down unless you

need to.

Summary of Contents for 2000 Express Van















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands