70
Changing the Batteries
The batteries will require changing yearly (based on the average usage) this may differ
depending on usage and on the quality of battery, the battery change is best done on the
annual service of the appliance.
However if the appliance is showing signs of diminishing signal or during the lighting sequence
then the batteries may need changing.
Firstly replace the handset battery before attempting to change the fire unit battery
(see fig. 168)
Remote Handset Battery
Fig. 168
3 x 1.5V AAA
(Quality alkaline recommended)
Receiver Batteries
4 x 1.5V “AA”
(Quality alkaline recommended)
If the batteries are running low you will hear 3 short beeps from the control box.
Ensure the appliance is cold.
The battery compartment is located in the base of the appliance on the right side (see fig. 169)
pull the ribbon to retrieve the battery holder (see fig. 170) remove the screw and replace the
batteries in the directions indicated in the compartment (see fig. 171, 172).
Check the connections are secure before replacing the box back in the appliance.
Fig. 169
Fig. 170
Fig. 171
Fig. 172
