32
Refit the 3 hex screws located at the bottom of the glass fixing (see fig. 105).
Care must be taken when using the allen key to prevent damage to paintwork.
Fig. 105
Tighten the five glass fixings at the top using the 4mm ball head allen key hexagon key.
Care must be taken when using the allen key to prevent damage to paintwork.
(see fig. 106).
Fig. 106
CAUTION
– All connections must be gastight.
Light the appliance on full and carry out a pressure check.
Contact the gas company if the line pressure is not correct.
If the gas pressure is running correctly turn off the appliance and allow it to cool.
Remove the glass
when cold.
NOTE - Ensure the appliance is cold before undoing the glass fixings.
Remove the burner and lift burner base. Remove the rubber tube and close the pressure test
point.
Fit the burner base.
