Chelsio Communications Chelsio T4, Installation And User Manual

Page: 29 / 511

Chapter I. Chelsio Unified Wire
Chelsio T5/T4 Unified Wire for Linux
Page 29
ii. Now, execute the following command:
[root@host~]# ./install.py -C -m <machinefilename>
iii. Select the required T5/T4 configuration tuning option. The tuning options may vary
depending on the Linux distribution.
iv. Select the required Cluster Configuration.
v. If you already have the required version of OFED software installed, you can skip this step.
To install OFED-3.18-1 choose the Install-OFED option.To skip this step, select Skip-OFED .
vi. The selected components will now be installed.
The above commands will install iWARP ( iw_cxgb4 ) and TOE ( t4_tom ) drivers on all the nodes
listed in the machinefilename file.
3.2.3. CLI mode
i. Download the tarball ChelsioUwire-x.xx.x.x.tar.gz from Chelsio Download Center,
http://service.chelsio.com/
ii. Untar the tarball using the following command:
[root@host~]# tar zxvfm ChelsioUwire-x.xx.x.x.tar.gz
iii. Change your current working directory to Chelsio Unified Wire package directory and build
the source using :
[root@host~]# make
iv. Install the drivers, tools and libraries using the following command:
[root@host~]# make install
v. The default configuration tuning option is Unified Wire. The configuration tuning can be
selected using the following commands:
[root@host~]# make CONF=<T5/T4 configuration>
[root@host~]# make CONF=<T5/T4 configuration> install