Chelsio Communications Chelsio T4, Installation And User Manual

Page: 235 / 511

Chapter XVIII. Classification and Filtering
Chelsio T5/T4 Unified Wire for Linux
Page 235
The above filter rule will pass all ingress packets that match local port 10001 and remote port
355 to ingress queue 2 for load balancing.

Switch action
[root@host~]# cxgbtool ethX filter 0 action switch iport 0 eport 1 vlan 3
The above filter rule will route all ingress packets that match VLAN id 3 from port 0 of Chelsio
adapter to port 1. Remaining packets will be sent to the host.
For offloaded ingress packets, use the prio argument with the above command:
[root@host~]# cxgbtool ethx filter <index> action <pass/drop/switch> prio 1
2.3. Listing Filter Rules
To list the filters set, run the following command:
[root@host~]# cxgbtool ethX filter show
2.4. Removing Filter Rules
To remove a filter, run the following command with the corresponding filter rule index
[root@host~]# cxgbtool ethX filter index <delete|clear>

For more information on additional parameters, refer cxgbtool manual by
running the
man cxgbtool
command.

prio argument is not supported for LE-TCAM filters when T5 Hash Filter
config file is used.
Note
For more information on additional parameters, refer cxgbtool manual by running
the
man cxgbtool
command
Note