Chelsio Communications Chelsio T4, Installation And User Manual

Page: 14 / 511

Chapter I. Chelsio Unified Wire
Chelsio T5/T4 Unified Wire for Linux
Page 14
RDMA Block Device driver (RBD)
WD-UDP *
iSCSI PDU Offload Target
iSCSI PDU Offload Initiator
Data Center Bridiging (DCB) *
FCoE PDU Offload Target *
FCoE full offload Initiator *
Offload Bonding driver
Offload Multi-Adapter Failover(MAFO)
UDP Segmentation Offload and Pacing
Offload IPv6 driver
Bypass driver
Classification and Filtering feature
Traffic Management feature (TM)
Unified Wire Manager (UM)
Unified Boot Software^
Lustre File System
Utility Tools (cop, cxgbtool, t4_perftune, benchmark tools, sniffer & tracer)
libs (iWARP and WD-UDP libraries)
For detailed instructions on loading, unloading and configuring the drivers/tools please refer to
their respective sections.
* This product is not supported with the current release. Support will be added in upcoming
releases.
^ FCoE and iSCSI Boot are not supported with the current release. Support will be added
in upcoming releases.
1.2. Hardware Requirements
The Chelsio Unified Wire software supports Chelsio T5 and T4 Series of Unified Wire Adapters.
To know more about the list of adapters supported by each driver, please refer to their
respective sections.
1.3. Software Requirements
The Chelsio Unified Wire software has been developed to run on 64-bit Linux based platforms
and therefore it is a base requirement for running the driver. To know more about the complete
list of operating systems supported by each driver, please refer to their respective sections.