Page 36
To alter the configuration of a Smart Lemo®:
•
Change any settings as required in the channel config window indicated
with an asterisk (*) and click Apply Settings.
•
Ensure the correct channel LUT config is in view in the Lookup Table
Config window and add/remove entry pairs manually, or clear & import
an LUT from a file (in the same way as with standard custom LUTs – see
section 5.8.2 above).
•
Click Write To Smart Connector to burn the LUT info into the Smart
Lemo® (the Func LED on the FlightDAQ-TL will illuminate whilst this
function is being actioned).
Summary of Contents for FlightDaq-TL
Page 20: ...Page 19 5 2 The Setup tab Figure 5 21 Main Setup page...
Page 25: ...Page 24 Figure 5 52 Live Data Page Figure 5 53 Live Data Page...
Page 46: ...Page 45 Select an additional Scan List in this case we have chosen 4...
Page 47: ...Page 46 Then disable the secondary and tertiary data streams...
