8
When ready to juice, assemble your juicer following these steps.
HOW TO DISASSEMBLE YOUR JUICER
To disassemble the Pro Juicer, follow these easy steps.
1. If pulp container is still in place—it does not lock on—remove
it by tilting it down and pulling it away from unit.
2. Remove the pusher from the feed tube, then unlock the safety clamp by pulling
it down and right.
3. Remove the lid, then remove the filter holder and metal filter together. Position
one hand under the spout and the other hand on the other side of unit and pull
up firmly. Carefully tap any excess pulp into the pulp container.
CAUTION:
Do not
use fingers to scrape away any pulp as the blades in the filter are sharp.
4. Carefully remove the metal filter.
HOW TO USE YOUR JUICER
Once assembled, the juicer is simple to operate.
1. Wash your fruits and vegetables to be juiced. Many fruits and vegetables do not
need to be peeled. If necessary, cut into pieces small enough to fit in the feed tube
(see the table on p. 10 for prep suggestions).
2. Ensure your juicer is correctly assembled (see directions p. 6), then plug the unit in.
3. Turn the control knob to your selected speed.
• Use Speed 1 (Low) for softer fruits and vegetables, such as watermelon,
grapes, cucumbers, tomatoes, and raspberries. Do not use with hard
vegetables. (See chart on p. 10 for more specific suggestions.)
• Use Speed 2 (High) for all types of fruits and vegetables.
4. With the motor running, place fruits and/or vegetables in batches into the feed tube.
OPERATING INSTRUCTIONS
