6
OPERATING INSTRUCTIONS
BEFORE FIRST USE
For best results, follow these steps before using your Pro Juicer for the first time.
1. Disassemble the unit following the directions on p. 8.
2. Check that all parts and accessories are accounted for before throwing away
any packaging materials. Note that the black cover on the spout is for protection
during shipping. It should not remain on the unit when juicing and may be thrown
away.
3. Read and remove any stickers except for the rating label, which should remain on
the unit.
4. Carefully hand wash removable parts before first use to remove any shipping dust.
WARNING:
The metal filter has sharp blades so be careful when handling and cleaning.
HOW TO ASSEMBLE YOUR JUICER
STEP 1:
Set the unplugged base on a
flat, firm work surface. (There
are suction cups on the bottom
to help it stay put.)
NOTE:
The
Pro Juicer is designed tilt
slightly toward the juice spout
to maximum juice flow.
STEP 2:
Lower the filter holder onto
the base with the spout on the
same side as the safety clamp.
STEP 3:
Press the metal filter into the
holder. The ribs on the bottom
of the filter should align with the
driving shaft. This may require
turning the filter until it snaps
into position.
