F10 Installation Manual
Rev. *60
70 of 71
F10, 1 Meter System
The diagram and corresponding table show the expected FCC and CE detection heights for the
F10, 1 meter system, using a 410EP tag in three different orientations (flat, side, and front carry).
Note: These detection heights are specified for a “clean” environment. If noise is present, detection
performance will be reduced.
Detection Heights
for a 410EP tag with TX = 31 and RX = 31:
A (cm)
B (cm)
C (cm)
Flat
95
115
95
Side
95
50
95
Front
65
85
65
Note: Detection heights are measured from the bottom of the antenna assembly, not from the finished floor
height. F10 system antennas are buried 7.6cm (3”) into the floor.
The following
Detection Patterns
are observed for the F10, 1 meter system. Note that the
orientation of the tag is important as it alters the expected detection height.
Flat Carry: