Classic IP Street Installation Manual
Rev.*60
21 of 27
Step 3
: Connect the SSB1 Lights/Sounder Cable wires to the electronic reader board (TR4210).
Step 4
: Connect the SSB2 Lights/Sounder Cable wires to the electronic reader board (TR4210).
For detail connection of Light/Sounder Cable wire , refer to Table 1 SSB Light/Sounder
Cable Wiring Table
Step 5
: Connect 24v DC power cable to the VDC power filter and then the output of the filter
board to J18 on the electronic reader board (TR4210).
Step 6
: Put the base cover(s) back and secure.
Figure 13 Chassis Box wiring
The R59 cable and Sounder/light
cable to antenna SSB 1
The R59 cable and Sounder/light
cable to antenna SSB 2
Power cable
