Classic IP Street Installation Manual
Rev.*60
16 of 27
Figure 6 SSB Coupler Board Jumper Settings
Wiring between Chassis Box /SSB
There are only two (2) wires connected Chassis and SSB. They are 1) RG59 coax cable and 2)
SSB Light/Sounder cable (22 AWG 4-conductors (STP) (5594))
RG59 Coax Cable
:
A 26ft long, two end pre-terminated RG59 coaxial cable is packed with SSB antenna. It connects
the Chassis Box antenna (SSB). It is recommended to leave the one pre-terminated end with 3-pin
Connector at the SSB, another pre-terminated shield end to Chassis Box. (Refer to
Figure 7 metal-
shielded
)
