Classic IP Street Installation Manual
Rev.*60
20 of 27
Note
: It is recommended to leave the pre-terminated coax cable end at SSB location where the
cable was laid out.
Step 3
: Connect the SSB Lights/Sounder cable to the wire terminal LT+ (White) / LT- (Green)
and SD+ (Red)/SD- (Black) resp.
Step 4
: Inspect wiring and connections, confirm coupler board jumper settings (see ).
Step 5
: Put the base cover back and secure.
Figure 12 Classic IP Street SSB Antenna Wiring
Chassis Box wiring
Step 1:
Open the base cover(s).
Step 2
: Cut, strip and terminate the RG59 coax cable, then plug it to the TR4210 board.
The R59 cable and Sounder/light cable to
Chassis Box
