Using the First Time Configuration Wizard
Quantum Spark 1530 / 1550 Appliance R80.20.XX Getting Started Guide | 20
Appliance Date and Time Settings
In the
Appliance Date and Time Settings
page, configure the appliance's date, time, and time zone
settings manually or use the Network Time Protocol option.
If you select the option
Set the time manually
, the appliance uses the date and time from your computer
as the initial values. If necessary, change the time zone setting to show your correct location. Daylight
Savings Time is automatically enabled by default. You can change this in the WebUI application on the
Device
>
Date and Time
page.
n
Date
- The date on your computer appears by default. If required, set a different date.
n
Time
- The time on your computer appears by default. If required, set a different time.
n
Time Zone
- The time zone on your computer appears by default. If required, select a time zone
setting to reflect your exact location.
n
Primary NTP server
- The IP or host name of the primary NTP server. The default server is
ntp.checkpoint.com
n
Secondary NTP server
- The IP or host name of the secondary NTP server. The default server is
ntp2.checkpoint.com
