Using the First Time Configuration Wizard
Quantum Spark 1530 / 1550 Appliance R80.20.XX Getting Started Guide | 22
n
Local management
- The appliance uses a web application to manage the security policy. After you
configure the appliance with the First Time Configuration Wizard, the default security policy is
enforced automatically. With the appliance WebUI, you can configure the Software Blades you
activated and fine tune the security policy.
This Getting Started Guide describes how to configure both locally and centrally managed deployments.
Security Management Server Connection
For Centrally managed appliances only:
After you set a one-time password for the Security Management Server and the appliance, you can
connect to the Security Management Server to establish trust between the Security Management Server
and the appliance.
To connect to the Security Management Server, select one of these:
n
Connect to the Security Management Server now
.
n
Connect to the Security Management Server later
.
If you select to connect now, enter the data for these fields:
n
Management address
- Enter the IP address or host name of the Security Management Server.
n
Connect
- When you successfully connect to the Security Management Server, the security policy
will automatically be fetched and installed.
n
If the Security Management Server is deployed behind a 3rd party NAT device, select
Always use
the above address to connect to the Security Management Server
. Manually enter the IP
address or the host name of the appliance should connect to reach the Security Management
Server.
If you enter an IP address, it will override the automatic mechanism that determines the routable
IP address of the Security Management Server for each appliance.
