English language
Use and maintenance
28
MAINTENANCE INFORMATION
7
Troubleshooting
The following list contains a number of common problems that may arise during work, together with the ways to
solve them.
Problem
Likely cause
Solution
The seedling planted is too close to
the surface or too deep
Incorrect planting depth
Make the relative adjustment (see
“Planting depth adjustment”)
The hole made in the plastic mulch
by the drilling cup is too long
Incorrect transmission ratios for
the soil type
Select the correct ratio (see “Plant
spacing range”) and replace the pinion
(see “Replacing the driving wheels
pinion”)
The soil has not been properly
compacted on top of the seedlings
Packing wheels not set correctly
Adjust the packing wheels (see
“Adjusting the packing wheels”)
There is soil building up in front of
the resting skid
Transplanting unit is applying too
much force to the ground
Adjust the force applied to the ground
by the unit (see “Adjusting the planting
force”)
The plastic mulch is being
damaged
Transplanting unit is applying too
much force to the mulch sheet
Adjust the force applied to the plastic
mulch by the unit (see “Adjusting the
planting force”)
