UN41 0112LF
B
B
A
UN41 0113LF
A
B
English language
Use and maintenance
16
ADJUSTMENT INFORMATION
5
Planting depth adjustment
Proceed as outlined below.
1) Turn the handwheel (A) to increase or decrease the
planting depth.
The planting depth can be further increased or de-
creased by raising or lowering the packing wheels.
To raise or lower the packing wheels, proceed as out-
lined below.
1) Lift the packing wheels off the ground.
2) Loosen the screws (B) on each packing wheel.
Adjusting the planting force (load applied to ground)
3) Raise or lower the wheels as required for the purpos-
es of the job in hand.
4) Tighten the screws (B).
5) Lower the wheels onto the ground.
Information
If installed, check the position of the plastic mulch
pressing skid, since it may be necessary to lower it in
order for it to work properly (see “Adjusting the plas-
tic mulch pressing skid”).
Proceed as outlined below.
1) Use handwheel (A) to ) decreases the weight on the
packing wheels.
2) Use handwheel (B) to increases the weight on the
packing wheels.
The correct weight to apply to the packing wheel is ob-
tained by turning both handwheels.
