UN41 0105LF
12
1
11
10
9
8
7
6
5
4
3
2
A
English language
Use and maintenance
5
TECHNICAL INFORMATION
2
The chart shows the layout of the cups on the control disk.
Cups n.
Cups housing reference
6
1
2
5
7
9
12
5
1
3
6
8
11
-
4
1
4
7
10
-
-
Plant spacing range
The distance between one seedling and the next (plant
spacing) depends on the number of drilling cups fitted
on the dispenser and the transmission ratio between the
rubberised wheel and the dispenser (see page 29 - “Re-
placing the driving wheels pinion”).
According to the plant spacing, the chart shows the
number of cups to fit on the dispenser, the type of gear
to use (number of teeth) and the most suitable plant
spacing to adopt for the type of soil.
N. cups on dispenser
Planting distance (plant spacing) in cm
6
20
22
25
28
29
30
33
5
25
27
30
33
35
37
39
4
31
34
37
41
44
46
49
N. teeth on the pinion
24
22
20
18
17
16
15
Reference
A
B
C
A - Plant spacing applicable to spongy soils only.
B - Preferable plant spacing on either bare ground or
plastic mulch.
C - Plant spacing to avoid, especially for plastic mulch.
Possible planting machine and plastic mulching machine couplings
The chart shows the possible work vehicle / mulching
machine combinations.
The following work vehicle models: WOLF COMPACT/3,
WOLF COMPACT/4, WOLF COMPACT/5, WOLF COMPACT/6
can be coupled to the (appropriately adapted) mulching
machine in order to spread out the plastic mulch and
plant the seedlings in a single operation.
For use of the mulching machine (which spreads plas-
tic mulching), see the use and maintenance manual for
models PS14, PS19, PS14 PLUS, or PLUS PS19.
Mulching machine
model
Planting machine model
WOLF
COMPACT/3
WOLF
COMPACT/4
PS14 - PS14 PLUS
X
-
PS19 - PS19 PLUS
-
X
