UN41 0581GN
UNIFOX DT/2
UNIFOX DT/3
UNIFOX DT/4
UNIFOX DT/5
UNIFOX DT/6
UNIFOX DT/7
English language
Use and maintenance
14
SAFETY INFORMATION CONCERNING HANDLING AND
INSTALLATION
4
Lifting (UNIFOX DT)
WARNING
During lifting watch out for the load swinging, as
the hook-up point is never perfectly at the centre of
gravity.
Lifting operations must be carried out using suitable
means for the load to be lifted, by qualified and author-
ised personnel in order to safeguard their own safety
and that of the other people involved in the operations.
To lift the work vehicle, proceed as follows.
1) Before lifting check the stability of the harness.
2) Strap up the work vehicle or separate units as shown
in the figure.
The machine is equipped with lifting plates marked with
appropriate signs.
The illustration shows the points for lifting the work ve-
hicle.
The lifting procedure shown applies for all the work ve-
hicle models specified in the manual.
The
UNIFOX DT/5
-
UNIFOX DT/6
-
UNIFOX DT/7
mod-
els must always be hoisted separately to avoid damage
to the frame and possible injury to persons involved in
the operations.
