12
8.
TRACK ADJUSTMENT
Proceed as follows to adjust the track:
8.1-
The tractor must be switched off with the service brake on.
8.2-
The tractor must be on solid and level ground.
8.3-
Check that the water barrels are completely empty.
8.4-
Detach the unit carrier frame (see detaching unit frame).
8.5-
Hook ropes and chains onto the frame (see lifting the frame).
8.6-
Lift the frame off the ground as less as possible to be able to detach
the tow bar from the tractor.
8.7-
Lift the frame as needed to be able to attach the appropriate devices
(support stand etc.) to keep the frame lifted safely from the ground.
WARNING! Do not go under the lifted machine if it is not properly
blocked.
8.8-
Loosen the nuts
“
C
”
Fig.2 page 7
and adjust the wheels fixed to the
axles in a transversal manner until you reach the desired track.
8.9-
Tighten the nuts
“
C
”.
9.
ADJUSTING THE LIFT DESCENT SPEED
Based on the load applied to the lift, it is possible to increase or
decrease the descent and ascent of the lift, proceed as follows:
9.1-
Loosen locknut
“
B
” that blocks valve rotation “
A
”.
9.2-
Turn valve
“
A
” clockwise/anti-clockwise to increase/decrease the
ascent and descent speed of the lift.
A
B
Summary of Contents for 998963
