15
2.2
(YELLOW) BUTTON (SECOND FUNCTION)
This button is used to select the type of measurement (AC, DC, AC+DC) and the
second functions marked in yellow next to the relevant positions of the switch.
It can also be used to modify the default values in configuration mode (see §
3.4).
NOTE:
This button is invalid in the MAX/MIN/PEAK and HOLD modes.
Successive
presses on
Function
short
Selects AC, DC or AC+DC. Depending on your
choice, the screen displays AC, DC or AC+DC.
Toggles between continuity
and Ohm
Ω
modes.
long (>2 sec)
Displays the total 3-phase power of a balanced
system (
is displayed). Press again to
return to the display of the single-phase power
(
is off).
2.3
BUTTON
This button is used to:
Scroll up through the order of harmonics or successive pages
Activate the backlighting
Activate the Bluetooth function
Successive
presses on
Function
short
Scrolls through the various pages of
measurement results, depending on the function
and possibly the active mode (MAX/MIN/PEAK
or THD/Harmonics)
long (> 2 sec)
Enables/disables the backlighting of the display
NOTE:
The backlight turns off automatically
after 2 minutes
combined with the
button
- Activates Bluetooth wireless communication
- The
symbol is displayed
NOTE:
Activation of Bluetooth mode
automatically stops the recording of the data
Summary of Contents for AEMC 2139.61
Page 1: ...607 POWER CLAMP ON METER User Manual ENGLISH ...
Page 2: ...2 ...
Page 62: ......
Page 63: ......