background image

 
 
 
 

Obsession™ LED 2.0 User Manual (Rev. 03) 

Page 15 of 20 

Contact 

Procedure 

In case you need to return a product or request support, follow the procedure below: 

  If you live in the US, contact CHAUVET® World Headquarters (see below).  

  If you live in the UK or Ireland, contact CHAUVET® Europe Ltd.(see below).  

  If you live in any other country, DO NOT contact CHAUVET®. Instead, contact your 

distributor of record. Refer to our Web site for contact details of distributors outside 
the US, United Kingdom, or Ireland. 

 

 

CHAUVET® 

Contact 

Information

 

World Headquarters 

CHAUVET® 

General Information

 

Address: 

5200 NW 108th Avenue 

 

Sunrise, FL 33351 

Voice:  

(954) 929-1115 

Fax:  

(954) 929-5560 

Toll free:  

(800) 762-1084 

United Kingdom & Ireland 

CHAUVET® Europe Ltd. 

General Information 

 

Address:  

Unit 1C 

 

Brookhill Road Industrial Estate 

 

Pinxton, Nottingham, UK 

 NG16 

6NT 

Voice:  

+44 (0)1773 511115 

Fax:  

+44 (0)1773 511110 

 

Technical Support

 

Voice:  

(954) 929-1115 (Press 

4

Fax:  

(954) 756-8015 

Email:  

[email protected] 

Technical Support

 

Email:  

[email protected] 

 

 

World Wide Web 

 www.chauvetlighting.com 

World Wide Web 

 www.chauvetlighting.co.uk 

 

 

 

If you live outside the US, United Kingdom, or Ireland, contact your distributor of 
record and follow their instructions on how to return CHAUVET® products to 
them. Visit our Web site for contact details. 

 

 

Returning 

Products to 
CHAUVET® 

Call the corresponding CHAUVET® Tech Support office and request a Return 
Merchandise Authorization (RMA) number before shipping the product. Be prepared to 
provide the model number, serial number, and a brief description of the cause for the 
return. 

You must send the merchandise prepaid, in its original box, and with its original packing 
and accessories. CHAUVET® will not issue call tags.  

Clearly label the package with the RMA number. CHAUVET® will refuse any product 
returned without an RMA number. 

 

 

 

DO NOT write the RMA number directly on the box. Instead, write it on a properly 
affixed label. 

 

 

 

Before sending the product, clearly write the following information on a piece of paper 
and place it inside the box: 

 Your 

name 

 Your 

address 

  Your phone number 

  The RMA number 

  A brief description of the problem 

Be sure to pack the product properly. Any shipping damage resulting from inadequate 
packaging will be your responsibility. As a suggestion, proper UPS packing or double-
boxing is always a safe method to use. 

 

 

 

CHAUVET® reserves the right to use its own discretion to repair or replace 
returned product(s). 

 

 

 

 

Summary of Contents for Obsession LED 2.0





















Reviews: