Page 10 of 20
Obsession™ LED 2.0 User Manual (Rev. 03)
4.
O
PERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the
display. Please refer to the Product Overview (page 5) to see the button locations on the
control panel.
Button
Function
<MENU>
Press to find an operation mode or to back out of the current menu
option
<UP>
Press to scroll up the list of options or to find a higher value
<DOWN>
Press to scroll down the list of options or to find a lower value
<ENTER>
Press to activate a menu option or a selected value
Menu Map
Mode
Programming Steps
Description
Automatic
Mode
AUTO
Turns on Automatic Mode
DMX Address
512 001-512
Selects the DMX starting address
Sound Active
Mode
SUd
Turns on Sound Active Mode
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket of the product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you
could restrict the access to some of the product’s channels.
The Obsession™ LED 2.0 uses up to 3 DMX channels in a 3-channel DMX mode, which
defines the highest configurable address to
510
.
If you are not familiar with the DMX protocol, you may refer to the
DMX Primer
section in
the
Technical Information
chapter.
To select the starting address, do the following:
1. Press
<MENU>
repeatedly until
512
shows on the display.
2. Press
<ENTER>
.
3. Use
<UP>
or
<DOWN>
to select the starting address.
4. Press
<ENTER>
.
