EZrail™ RGBA User Manual
Page 17 of 22
Auto Program
To enable the auto program, do the following:
1. Press
<MENU>
repeatedly until
AUTO
shows on the display.
2. Press
<ENTER>
and
n 1
–
n100
(number of loops) show on the display.
3. Use
<UP>
or
<DOWN>
to select the desired setting.
4. Press
<ENTER>
and run speed options
SP 1
–
SP99
,
SPFL
(slow to fast) show on
the display.
5. Use
<UP>
or
<DOWN>
to select the desired run speed for the auto program.
6. Press
<ENTER>
and the dimmer speed options
Fd 0
–
Fd99
(slow to fast) show on
the display
7. Use
<UP>
or
<DOWN>
to select the desired dimmer speed for the auto program.
8. Press
<ENTER>
and the strobe speed options
FS 0
–
FS99
(slow to fast) show on
the display.
9. Use
<UP>
or
<DOWN>
to select the desired strobe speed for the auto program.
10. Press
<ENTER>
.
Custom Color
Mixing
To custom mix a color, follow the instructions below:
1. Press
<MENU>
repeatedly until
Colr
shows on the display.
2. Press
<ENTER>
and one of the following colors shows on the display:
rXXX
(red)
,
gXXX
(green),
bXXX
(blue) or
AXXX
(amber).
3. Press
<ENTER>
repeatedly to select the desired color.
4. Use
<UP>
or
<DOWN>
to select the desired color value (
0
–
255
).
NOTE
: Selecting
0
will turn the color off.
5. Press
<ENTER>
to select color value and continue to the next color.
6. Repeat steps 3 to 5 until you create your desired color.
Infrared Remote
Control
(IRC)
The EZrail™ RGBA is fully compatible with the Infrared Remote Control (IRC) from
CHAUVET®. To enable use with the IRC, do the following:
1. Press
<MENU>
repeatedly until
-ir-
shows on the display.
2. Press
<ENTER>
.
IRC Sensor
