Page 12 of 22
EZrail™ RGBA User Manual
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The EZrail™ RGBA uses up to 18 DMX channels in its 18-channel DMX personality,
which defines the highest configurable address to
495
.
If unfamiliar with DMX, download the DMX Primer from
www.chauvetlighting.com
.
To select the starting address, do the following:
1. Press
<MENU>
repeatedly until the desired DMX personality (
2-CH
,
4-CH
,
5-CH
,
8-CH
,
10CH
,
18CH
) shows on the display.
2. Press
<ENTER>
and
d 1
–
d512
shows on the display.
3. Use
<UP>
or
<DOWN>
to select the starting address.
4. Press
<ENTER>
.
EZrail™ RGBA Sections for DMX Control
1
2
3
4
