Page 16 of 22
EZrail™ RGBA User Manual
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
Never connect a product that is operating in any standalone mode (either Static,
Auto, or Sound-Active) to a DMX string connected to a DMX controller. Products
in standalone mode may transmit DMX signals that could interfere with the DMX
signals from the controller.
Preset Programs
including
Sound-Active
Mode
To select a preset programs, do the following:
1. Press
<MENU>
repeatedly until
Pr 1
–
Pr17
shows on the display.
2. Use
<UP>
and
<DOWN>
to select the desired preset program.
Note: Pr 1–Pr15 are auto programs and Pr16–Pr17 are Sound-Active programs.
3. Press
<ENTER>
and run speed options
SP 1
–
SP99
,
SPFL
(slow to fast) show on
the display.
4. Use
<UP>
or
<DOWN>
to select the desired run speed for the preset program.
5. Press
<ENTER>
and the dimmer speed options
Fd 0
–
Fd99
(slow to fast) show on
the display.
6. Use
<UP>
or
<DOWN>
to select the desired dimmer speed for the preset program.
7. Press
<ENTER>
and the strobe speed options
FS 0
–
FS99
(slow to fast) show on
the display.
8. Use
<UP>
or
<DOWN>
to select the desired strobe speed for the preset program.
9. Press
<ENTER>
.
Note: With preset programs Pr16 and Pr 17 only, the options for background color
and front color become available as follows:
After pressing
<ENTER>
,
1 _ _ _
(background color) shows on the display.
10. Use
<UP>
or
<DOWN>
to select the desired background color (
r
,
g
,
b
,
A
,
rg
,
rb
,
rA
,
gb
,
gA
,
bA
,
rgb
,
rgA
,
rbA
,
gbA
, and
rgbA
) for Pr16/Pr17.
11. Press
<ENTER>
and
2 _ _ _
(front color) shows on the display.
12. Use
<UP>
or
<DOWN>
to select the desired front color (
r
,
g
,
b
,
A
,
rg
,
rb
,
rA
,
gb
,
gA
,
bA
,
rgb
,
rgA
,
rbA
,
gbA
, and
rgbA
) for Pr16/Pr17.
13. Press
<ENTER>
.
Sound Sensitivity
To set the sound sensitivity for the Sound-Active mode, follow the instructions below:
1. Press
<MENU>
repeatedly until
SU 0
–
SU31
shows on the display.
2. Use
<UP>
and
<DOWN>
to select the desired sound sensitivity.
3. Press
<ENTER>
.
The product will only respond to low frequencies of music (bass and drums).
