Page 10 of 22
EZrail™ RGBA User Manual
Mounting
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
Orientation
The EZrail™ RGBA may be mounted in any position; however, make sure adequate
ventilation is provided around the product
Rigging
•
Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
•
Make sure that the structure or surface onto which you are mounting the product
can support the product’s weight (see the
Technical Specifications
).
•
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, such as an elevated platform or a truss.
•
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The brackets have a 13-mm hole, which is appropriate
for this purpose.
•
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
•
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
•
The L-brackets also serve as floor supports/allow for surface mounting. When
mounting the product on the floor, make sure that the product and cables are away
from people and vehicles.
Mounting Diagram
Mounting Clamp
Safety Cable
Hanging/Mounting
Bracket
Safety Loop
L-Brackets
Floor Mounting
Bracket Adjustment
Knobs
